Operation Manual

EN
Internal assemblies 117
Pickup roller shaft
1 Remove the left side, back, right side, and top covers (see pages
80 through 87).
2 Remove the front cover, toner cartridge door, and front guide
assembly (see pages 89 through 95).
3 Remove the right plate assembly (see page 112).
4 Remove the pickup assembly (see page 114).
5 Slide the shaft toward the right until the left end (callout 1)
releases.
6 Carefully pull the left end of the shaft toward you until it clears the
left side of the chassis.
7 Pull the shaft to the left and out of the printer.
Figure 61. Removing the pickup roller shaft
To reinstall
Be sure to align the clutch on the pickup roller shaft with the follower
(large plastic tab) (callout 2) on the paper lift plate.
2
1
2
2