Operation Manual

EN
Internal assemblies 119
Left plate assembly
1 Remove the left side, back, right side, and top covers (see pages
80 through 87).
2 Remove the front cover, toner cartridge door, and front guide
assembly (see pages 89 through 95).
3 Remove the formatter (see page 97).
4 Remove six screws (callout 1). If you have not already removed
the fuser, remove the fuser screw (callout 2).
5 Lift the left plate assembly off of the printer.
Figure 63. Removing the left plate assembly
2
2
2
1