Operation Manual

124 Chapter 5 - Removal and replacement
EN
Paper-feed assembly
1 Remove the left side, back, and right side covers (see pages 80
through 86).
2 Remove the right plate assembly (see page 112).
3 Remove the ECU pan (see page 120).
4 Unwind the fan and solenoid cables from the cable guides
(callout 1) on the paper-feed mechanism.
5 Remove two screws (callout 2) from the paper-feed mechanism.
6 Remove one screw (callout 3) from the paper sensor PCB
assembly.
Figure 68. Removing the paper-feed assembly (1 of 4)
2
2
2
2
3
1