Operation Manual

154 Chapter 6 - Troubleshooting
EN
To check the high-voltage connector assembly
The assembly uses three spring-loaded pins to contact the toner
cartridge: drum ground (callout 1), charging (callout 2), and
developing roller (callout 3). Verify that the pins are not dirty or
corroded and that the spring-loading action is functional. If the pins
are dirty, clean them using isopropyl alcohol only. If they are
damaged, replace the high voltage connector assembly.
Figure 77. High-voltage connector assembly (right side)
Figure 78. High-voltage connector assembly (left side)
2
1
2
2
2
3