Operation Manual

EN
Identifying printer components 31
Door open, media out, no
toner cartridge, or paper jam
The printer is in an error state
that requires operator
intervention or help.
! Make sure that the toner cartridge door
is completely closed.
! Make sure that the media is loaded
correctly. See the user guide for
instructions.
! Make sure that the toner cartridge is
correctly installed in the printer. See the
user guide for instructions.
! If the printer still has an error, there is a
paper jam. See the user guide for
instructions.
Printer initialization/Cancel
Job/Cleaning Mode
A printer initialization is taking
place. If all lights blink for half
of a second or longer in a
sequence:
the printer is initializing
all previously sent print jobs
are being purged
a cleaning page is being
printed
No action is necessary.
Fatal error
All lights are on.
! Turn the printer off and then back on.
! Unplug the printer for five minutes, and
then plug it back in.
! If the printer still has an error, see
chapter 6, “Troubleshooting.”
Accessory error
All lights are blinking.
! Remove the DIMMs and reseat. See
the user guide for instructions.
! If the printer still has an error, replace
the DIMMs.
Table 9. Control panel light messages (continued)
Light
status
Condition of the printer Action