Operation Manual

EN
User-replaceable parts 43
Replacing the printer
separation pad
Note
Before you change the separation pad,
clean the pickup roller. See “Cleaning
the printer pickup roller” on page 49 for
instructions.
If the input tray feeds more than one
page at a time, you might have to
replace the printer separation pad.
Recurring feed problems indicate that
the printer separation pad is worn.
1 Unplug the power cord from the
printer, and allow the printer to cool.
2 Remove the input trays.
3 Locate the blue separation pad.
4 To pry the separation pad up from
the spring-loaded base, insert a flat-
edged screwdriver in the slot under
the separation pad and twist until the
tabs are free.
5 Reach in through the input tray
opening, push the spring-loaded
base down with one hand, and pull
the separation pad up with the other
hand.
1
2
3
4
5