Operation Manual

52 Chapter 3 - Maintenance
EN
3 Dampen a clean cotton cloth with
isopropyl alcohol (pH7 or
neutral pH). With the damp cloth,
gently rub back and forth on the
white sheet. Also, use the damp
cloth to gently rub the rollers.
WARNING!
Alcohol is flammable. Keep the alcohol
and cloth away from an open flame.
Allow the alcohol to dry completely
before you plug in the power cord.
4 Spray glass cleaner on another
piece of clean cotton cloth, and
carefully clean the glass on the
image sensor.
WARNING!
Make sure that the scanner is completely
dry before you plug in the printer power
cord.
5 Plug the printer in to turn it back on.
4
5
3