Operation Manual

88 Chapter 5 - Removal and replacement

Control panel assembly

1 Remove the left side, back, right side, and top covers (see pages

80 through 87).

2 Disconnect the control panel cable (callout 1) from the formatter.

3 Remove two screws (callout 2 and callout 3) from the top of the

control panel assembly.

Note The first screw (callout 2) secures the control panel casing, and the

second screw (callout 3) secures the internal bracket. Be sure to hold

the assembly together as you remove it.

Rotate the control panel assembly toward the front of the printer to

release the tab (callout 4).

4 Remove the control panel assembly.

Figure 32. Removing the control panel