Operation Manual

Covers 91

Toner cartridge door

1 Remove the left side, back, right side, and top covers (see pages

80 through 87).

2 Remove the control panel assembly (see page 88).

3 Remove the front cover (see page 89).

4 Open the toner cartridge door.

5 Remove one screw (callout 1) from the bracket on the right side

of the printer, and remove the bracket.

6 At the right side, press the two small tabs (callout 2) on the inside

of the connecting link to release it.

7 Repeat on the left side.

Note After the toner cartridge door is removed, it is easy to remove the two

connecting links.

Figure 35. Removing the toner cartridge door (1 of 2)