Operation Manual

4. With a dry, lint-free cloth, wipe any residue from the paper path area and the print
cartridge cavity.
5. Reinstall the print cartridge and close the top cover.
NOTE
If the print cartridge is difficult to reinstall, make sure that the registration plate has been
flipped back down into position and that you have pushed the print cartridge firmly in place.
6. Plug in the power cable and turn the printer on.
Cleaning the fuser
Run the printer cleaning page to keep the fuser free of toner and paper particles that can
sometimes accumulate. Accumulation of toner and particles can cause specks to appear on
the front or back side of your print jobs.
To ensure optimum print quality, HP recommends that you use the cleaning page every time
that you replace the print cartridge or on an automatic interval that you can set up.
The cleaning procedure takes about 2.5 minutes to complete. A CLEANING message
appears on the printer control panel display while the cleaning is taking place.
To run the cleaning page
In order for the cleaning page to work properly, print the page on copier-grade paper (not
bond, heavy, or rough paper).
1. If your printer model includes a duplexer, open the rear output bin.
2. Press M
ENU to open the menus.
3.
Use
(U P button) or (D OWN button) to scroll to CONFIGURE DEVICE, and then press
(S ELECT button).
4.
Use
(U P button) or (D OWN button) to scroll to PRINT QUALITY, and then press
(S ELECT button).
5.
Use
(U P button) or (D OWN button) to scroll to CREATE CLEANING PAGE, and then
press
(S ELECT button).
6. Follow the instructions on the cleaning page to complete the cleaning process.
ENWW Cleaning the printer 93