Operation Manual

Clearing jams in the input trays

NOTE

If paper has entered the print cartridge area, follow the instructions in Clearing jams in the

print-cartridge area. It is easier to remove paper from the print cartridge area than from the

paper-feed area.

1. Slide out tray 2 or tray 3 to expose the jam.

2. Remove any misfed media by pulling it out by the visible edge. Make sure that all of the

media is aligned in the tray (see

Loading trays). If tray 3 is installed, remove any misfed

media and make sure that all of the media is aligned in that tray.

3. If the media is jammed in the paper-feed area and cannot be reached from the print-

cartridge area, grasp the sheet and carefully pull it free from the printer.

4. For tray 2, push the stack down to lock the metal paper-lift plate into place. For both

trays, slide the tray into the printer.

To reset the printer and continue printing, press

ELECT

button).

112 Chapter 4 Problem solving ENWW