Operation Manual

NOTE
If the Attention light does not go out, jammed media remains inside the printer. Check the
paper-feed and rear-output areas for jams. For printers that include a built-in duplexer, check
the duplexer area.
Clearing jams in the output areas
Jams in this area might result in loose toner on the page. If you get any toner on your
clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.)
1. Open the top cover and remove the print cartridge. Open the rear output bin. (The rear
output bin might be hard to open. If necessary, pull hard to open it.)
NOTE
It is necessary to open the top cover in order to release the rear output gears and to remove
the media easily.
2. If the media is visible from the rear output opening, carefully use both hands to pull the
leading edge out of the printer. Carefully remove the rest of the jammed media from the
printer.
3. If the media is almost completely visible from the top output bin, pull the remaining
media carefully out of the printer. If the leading edge is not visible or is barely visible in
the print-cartridge area, open the rear output bin all the way. To do this, push the bin
door slightly forward and use your finger to disengage the grill at the base. Turn the jam-
clearing wheel to move the media out of the printer.
ENWW Clearing jams 113