Operation Manual

4. Reinstall the print cartridge. Close the top cover and the rear output bin.
NOTE
If the print cartridge is difficult to reinstall, make sure that the registration plate has been
flipped back down into position and that you have pushed the print cartridge firmly in place.If
the Attention light does not go out, jammed media remains inside the printer. Check the
paper-feed and rear-output areas for jams. For printers that include a built-in duplexer, check
the duplexer area.
Clearing jams in the duplexer area
This procedure applies only to printers that include a duplexer.
1. Remove tray 2 from the printer.
2. Push the green button on the right front of the tray 2 opening to open the paper-access
plate.
3. Reach in and pull out the jammed paper.
114 Chapter 4 Problem solving ENWW