Operation Manual

6. Make sure that the environmental specifications for the printer are being met. (See
Operating environment.)
7. Replace the print cartridge.
Toner smear
1. Print a few more pages to see if the problem corrects itself.
2. Try using a different type of paper.
3. Make sure that the environmental specifications for the printer are being met. (See
Operating environment.)
4. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
Cleaning
the printer.)
5. Replace the print cartridge.
Also see
Loose toner.
Loose toner
Loose toner, in this context, is defined as toner that can be rubbed off the page.
1. If paper is heavy or rough, open the Configure Device menu at the printer control panel.
On the Print Quality submenu, select FUSER MODES, and then select the paper type
you are using. Change the setting to HIGH 1 or HIGH 2, which helps the toner fuse more
completely onto the paper. (See
Print Quality submenu.) You must also set the type of
paper for the tray you are using. (See
Printing by type and size of media (locking trays).)
2. If you have observed a rougher texture on one side of your paper, try printing on the
smoother side.
3. Make sure that the environmental specifications for the printer are being met. (See
Operating environment.)
4. Make sure that type and quality of the paper you are using meet HP specifications. (See
Paper specifications.)
132 Chapter 4 Problem solving ENWW