Operation Manual

Paper Handling menu
If paper-handling settings are correctly configured at the printer control panel, you can print
by selecting the type and size of media in the program or the printer driver. For more
information about configuring for media types and sizes, see
Printing by type and size of
media (locking trays). For more information about supported media types and sizes, see
Supported types and sizes of print media and Paper specifications.
Some items on this menu (such as duplex and manual feed) are available in the program or
the printer driver (if the appropriate driver is installed). Program and printer-driver settings
override control-panel settings. For more information, see
Using the printer driver.
The following table lists the settings and possible values. In the Values column, the default
value for each setting is the one that has an asterisk (*) next to it.
Item Values Explanation
TRAY 1 SIZE *ANY SIZE
LETTER
LEGAL
EXECUTIVE
A4
A5
B5 (JIS)
EXECUTIVE (JIS)
D POSTCARD (JIS)
16K
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
ANY CUSTOM
Use this item to set the value
to correspond with the media
size that is currently loaded in
tray 1.
ANY SIZE: If both the type
and size for tray 1 are set to
ANY, the printer will pull media
from tray 1 first if media is
loaded in the tray.
A size other than ANY SIZE:
The printer does not pull from
this tray unless the type or
size of the print job matches
the type or size that is loaded
in this tray.
ENWW Paper Handling menu 161