Operation Manual

Item Values Explanation
SET
REGISTRATION
PRINT TEST PAGE
SOURCE
ADJUST TRAY [N]
Shifts the margin alignment to center the image
on the page from top to bottom, and left to right.
You can also align the image that is printed on
the front with the image that is printed on the
back.
PRINT TEST PAGE: Prints a test page that
shows the current registration settings.
SOURCE: Selects the tray for which you want to
print the test page.
ADJUST TRAY [N] : Sets the registration for the
specified tray, where [N] is the number of the
tray. A selection appears for each tray that is
installed, and registration must be set for each
tray.
● X1 SHIFT: Registration of the image on the
paper from side to side, as the paper lies in
the tray. For duplexing, this side is the
second side (back) of the paper.
● X2 SHIFT: Registration of the image on the
paper from side to side, as the paper lies in
the tray, for the first side (front) of a
duplexed page. This item appears only if the
printer includes a built-in duplexer and
DUPLEX is ON. Set the X1 SHIFT first.
● Y SHIFT: Registration of the image on the
paper from top to bottom as the paper lies in
the tray.
ENWW Configure Device menu 169