Operation Manual

Item Values Explanation
FUSER MODES PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
LIGHT 60-75 G/M2
CARDSTOCK
164-200 G/M2
ROUGH
ENVELOPE
RESTORE MODES
Configures the fuser mode associated with each
media type.
Change the fuser mode only if you are
experiencing problems printing on certain media
types. After you select a type of media, you can
select a fuser mode that is available for that
type. The printer supports the following modes:
NORMAL: Used for most types of paper.
HIGH 1: Used for rough paper.
HIGH 2: Used for paper that has a special or
rough finish.
LOW 1: Used for lightweight media. Use this
mode if you are having problems with curled
paper.
LOW 2: Used for transparencies.
The default fuser mode is NORMAL for all print
media types except transparencies (LOW 2),
and rough paper (HIGH 1).
CAUTION
Do not change the fuser mode for
transparencies. Failure to use the LOW 2 setting
while printing transparencies can result in
permanent damage to the printer and fuser.
Always select Transparencies as the Type in the
printer driver and set the tray type at the printer
control panel to TRANSPARENCY.
When selected, RESTORE MODES resets the
fuser mode for each media type back to its
default setting.
RESOLUTION 300
600
*FASTRES 1200
Selects the resolution. All values print at the
same speed.
300: Produces draft print quality and can be
used for compatibility with the HP LaserJet III
family of printers.
600: Produces high print quality for text and can
be used for compatibility with the HP LaserJet 4
family of printers.
FASTRES 1200: Produces 1200-dpi print quality
for fast, high-quality printing of business text and
graphics.
NOTE
It is best to change the resolution in the program
or printer driver. (Program and printer-driver
settings override control-panel settings.)
170 Appendix B Control panel menus ENWW