Operation Manual

Item Values Explanation
PERSONALITY *AUTO
PDF
PS
PCL
Selects the default printer language
(personality). The possible values are
determined by which valid languages are
installed in the printer.
Normally, you should not change the printer
language. If you change it to a specific printer
language, the printer will not switch automatically
from one language to another unless specific
software commands are sent to the printer.
CLEARABLE
WARNINGS
*JOB
ON
Sets the amount of time that a clearable warning
appears on the printer control-panel display.
JOB: The clearable warning message appears
until the end of the job that generated the
message.
ON: The clearable warning message appears
until you press
(S ELECT button).
AUTO
CONTINUE
OFF
*ON
Determines how the printer reacts to errors. If
the printer is on a network, you probably want to
turn AUTO CONTINUE to ON.
ON: If an error occurs that prevents printing, the
message appears on the printer control-panel
display, and the printer goes offline for
10 seconds before returning online.
OFF: If an error occurs that prevents printing, the
message remains on the printer control-panel
display, and the printer remains offline until you
press
(S ELECT button).
CARTRIDGE
LOW
STOP
*CONTINUE
Determines how the printer behaves if the print
cartridge is low. The message first appears
when about 16% (6,000-page cartridge) or about
8% (12,000-page cartridge) of the life remains in
the print cartridge. Print quality is not guaranteed
if you print after receiving this message.
STOP: The printer pauses printing until you
replace the print cartridge or press
(S ELECT
button) each time you turn the printer on. The
message appears until you replace the print
cartridge.
CONTINUE: The printer continues to print, and
the message appears until you replace the print
cartridge.
174 Appendix B Control panel menus ENWW