Operation Manual

Printing on special media
This section discusses printing on types of media that require special handling:
●
Printing on labels
●
Printing on transparencies
●
Printing on custom-sized media or cardstock
●
Printing on letterhead, prepunched, or preprinted paper (single-sided)
Printing on labels
Use only labels that are recommended for laser printers. For label specifications, see Labels.
Guidelines for printing on labels
● Print labels from tray 1.
● Load labels print-side up.
● Use the rear output bin for labels.
● Remove label sheets from the output bin as they are printed to prevent them from
sticking together.
● Do not use labels that are separating from the backing sheet or are wrinkled or damaged
in any way.
● Do not use label sheets that have the backing sheet exposed, and do not reuse partially
used label sheets.
● Do not feed a sheet of labels through the printer more than once. The adhesive backing
is designed for one pass through the printer.
CAUTION
If a sheet of labels becomes jammed in the printer, see Clearing jams.
50 Chapter 2 Printing tasks ENWW