Operation Manual

Tray 2 or tray 3 orientation: print-side down, top edge toward you.
NOTE
When Alternative Letterhead mode is enabled in the printer driver, and Letterhead or
Preprinted is selected as the media type, you must orient the media for two-sided (duplex)
printing.
Guidelines for printing on letterhead or preprinted forms
● Do not use letterhead paper that is printed with low-temperature inks, such as those
used in some types of thermography.
● Do not use raised or embossed letterhead.
● The printer uses heat and pressure to fuse toner to the paper. Make sure that any
colored paper or preprinted forms use inks that are compatible with this fusing
temperature (200°C or 392°F for 0.1 second).
ENWW Printing on special media 53