Owner's manual

8. Place the cover and insert the screws.
9. Close the loading table.
Replace a primer
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see Safety precautions on page 2
Prepare to replace a primer
1. Ensure that you have the Primer and Latch Kit (CZ056-67396), which is included in the Standard Uptime
Kit (D4J02A).
2. Ensure that the printer is not printing.
3. Ensure that all windows, covers, and doors are closed and remain in their original position.
4. Move the carriage to the service position.
5. Turn off the printer in the correct way for maintenance operations: see Turn the printer off on page 142.
6. Stand on the folding steps and open the service position window.
Replace a primer
1. Disconnect the primer cable. You have to disconnect a white connector that you can find at the back of
the printhead whose primer is to be replaced.
ENWW Replace a primer 207