Owner's manual

Side A: Load and print
1. Load the roll-to-roll configuration: see Load a roll (roll-to-roll configuration) on page 45.
NOTE: Neither the dual-roll spindle nor the ink collector kit can be used while printing double-sided
jobs.
2. Define side A preferences (see Double-sided on page 84) and select the Print button.
3. Before unloading the substrate, select the Substrate load/unload button in the IPS, select How to
unload side A, and follow the on-screen instructions.
NOTE: Jobs must be defined for double-sided printing, side A and side B, this information is available
while a job is printing in Print Properties.
NOTE: Selecting the check boxes Side B: loading space and Side B: Calibration space is highly
recommended, see Define double-sided job on page 85.
Side A: Unload
1. Cut the substrate close to the input roll.
64 Chapter 3 Handle the substrate ENWW