Unattended Deployment of Microsoft Windows 7 on HP Business Desktops with the HP Integrated Device Driver Kit

5
The following diagram illustrates the deployment process.
Figure 1: Network deployment model
Getting Started with the MDT 2010 Deployment
Workbench
In this section, we create a New Deployment Share inside the Deployment
Workbench.
1. Click Start  All Programs  Microsoft Deployment Toolkit  Deployment
Workbench.
2. In the Deployment Workbench console tree, select Deployment Shares. In the
Actions pane, click New Deployment Share.
3. The New Deployment Share Wizard starts. Perform the following steps to create
the new deployment share:
a. Path – Specify the location of the deployment share as
C:\Deploymentshare$ and then click Next.
b. Share – This is automatically set; click Next.
c. Descriptive Name – Keep the default name and click Next.
d. Allow Image Capture – When performing a new computer (bare metal)
deployment into a workgroup, the deployment wizard normally asks if an
image should be captured. This step can be skipped if it is not required.
(Captures of domain-joined machines are not recommended.) Clear the
Ask if an image should be captured check box and then click Next.