Dual-port Network Interface Card Installation

ManualsBrandsHP ManualsDesktopsHP Z800 Workstation

Dual-port Network Interface Card

installation

Introduction

This document describes how to install a dual-port Network Interface Card (NIC ) in your HP

computer.

The HP NC360T PCIe Dual Port Gigabit NIC is built for HP by Intel® Corporation. The device drivers,

management application software, and documentation provided on the enclosed CD carry Intel®

branding. For the purposes of software installation and documented features, the HP NC360T is

functionally equivalent to the Intel® Pro/1000 PT Dual Port Server Adapter.

Kit contents

● Dual-port NIC

● Driver CD

●

Installation instructions (this document)

●

Warranty documentation

Before you begin

To view QuickSpecs and determine the compatibility of this product with your HP computer, see

http://www.hp.com/gp/productbulletin.

trademark of the Intel Corporation in the US and other countries, and is

used under license. Printed in the U.S.

ENWW Introduction 1

Summary of content (4 pages)

PAGE 1
Dual-port Network Interface Card installation Introduction This document describes how to install a dual-port Network Interface Card (NIC ) in your HP computer. The HP NC360T PCIe Dual Port Gigabit NIC is built for HP by Intel® Corporation. The device drivers, management application software, and documentation provided on the enclosed CD carry Intel® branding.
PAGE 2
Warnings and cautions WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching. WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of an electrical shock hazard.
PAGE 3
Step 1—Preparing for component installation NOTE: Computer models vary. All illustrations are examples only. Download and install updates 1. Check for available system BIOS updates specified for your HP computer model and operating system at http://www.hp.com/support. 2. Install the system BIOS updates, if available. Accessing the internal components of the computer 1.
PAGE 4
Step 2—Installing the dual-port NIC 1. Install the dual-port NIC by pressing it securely into the expansion slot (1). 2. Verify that the keyed components of the card align with the socket, then close the expansion slot retention clamp (2). Figure 2 Installing the dual-port NIC Step 3—Reassembling the computer 1. Reinstall the card support, if applicable. 2. Reinstall the side access panel. 3. Reconnect power to the computer and all external devices. 4.