LCD Installation Guide HP ap5000 All-In-One POS System
11. 덮개 하단의 탭을 터치 스크린 베이스에 있는 슬롯에 집어 
넣고(1) 제자리에 찰칵하고 잠기도록 덮개의 상단을 안쪽으
로 밀어 올려서(2) I/O 덮개를 다시 끼웁니다.
12. 전원 코드를 다시 연결하고 I/O 패널의 전원 단추를 누릅니다.
LCD 제어 단추
미연방 통신 위원회(FCC) 안내 사항
이 장치는 FCC 규칙의 Part 15에 준하여 테스트 되었고 Class A 디지
털 장치에 대한 제한을 준수하는 것으로 확인되었습니다. 이러한 제
한은 장치가 상업적 환경에서 작동 시 유해한 전파 간섭으로부터 합
당한 보호를 제공하기 위해 고안되었습니다. 이 장치는 무선 주파수 
에너지를 생성하고 사용하며 방출할 수 있고, 지침에 따라 설치하고 
사용하지 않으면 무선 통신에 유해 혼신을 유발할 
수 있습니다. 주거 
지역에서 이 장치를 작동하면 유해한 간섭을 유발할 수 있으며, 그럴 
경우 개인 비용으로 간섭 문제를 해결해야 할 수도 있습니다.
수정 사항
FCC는 Hewlett-Packard에서 명시적으로 승인하지 않은 이 장치에 대
한 모든 변경 및 수정이 사용자의 장치 조작 권한을 무효화할 수 있음
을 사용자에게 알리도록 권장합니다.
케이블
FCC 규제 및 규칙을 준수하려면 금속 RFI/EMI 커넥터 후드가 있는 
차폐된 케이블로 본 장치에 연결해야 합니다.
Canadian Notice
This Class A digital apparatus meets all requirements of the Canadian 
Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe A respecte toutes les exigences du 
Règlement sur le matériel brouilleur du Canada.
European Union Regulatory Notice
This product complies with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• Ecodesign Directive 2009/125/EC where applicable
CE compliance of this product is valid only if powered with the correct 
CE-marked AC adapter provided by HP.
Compliance with these directives implies conformity to applicable 
harmonized European standards (European Norms) which are listed on 
the EU Declaration of Conformity issued by Hewlett-Packard for this 
product or product family.
This compliance is indicated by the following conformity marking 
placed on the product:
The official EU CE declaration of conformity for this device may be 
found at http://www.hp.eu/certificates
.
The point of contact for regulatory matters is Hewlett-Packard GmbH, 
HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany.
German Ergonomics Notice
HP products which bear the “GS” approval mark, when forming part of 
a system comprising HP brand computers, keyboards and monitors that 
bear the “GS” approval mark, meet the applicable ergonomic 
requirements. The installation guides included with the products provide 
configuration information.
China Notice
Japanese Notice
한국 관련 안내 사항
Taiwan Notice
이 문서의 번역된 버전
이 문서의 번역본은 http://www.hp.com에서 다음 언어로 이용할 수 
있습니다.
• 포르투갈어 (브라질)
• 네덜란드어
• 영어
• 프랑스어
• 독일어
• 인도네시아어
• 이탈리아어
• 일본어
• 한국어
• 중국어 간체
• 스페인어
• 중국어 번체
• 태국어
번호 단추 설명
1
재설정/
종료
LCD 화면을 자동으로 조정합니다. OSD 메뉴가 열
려 있는 상태에서 누르면 OSD 메뉴가 종료됩니다.
2
입력/
메뉴
OSD 메뉴가 열려 있는 상태에서 누르면 메뉴 또는 
하위 메뉴로 들어갑니다. OSD 메뉴가 열려 
있지 않
은 상태에서 누르면 OSD 메뉴가 열립니다.
3
왼쪽/
아래로
OSD 메뉴 내에서 왼쪽 또는 아래로 이동합니다.
4
오른쪽/
위로
OSD 메뉴 내에서 오른쪽 또는 위로 이동합니다.
5
전원
켜짐/
꺼짐
LCD 전원을 켜거나 끕니다.
XXXX*
This marking is valid for non-
Telecom products and EU 
harmonized Telecom products 
(e.g. Bluetooth)
This marking is valid for EU non-harmonized 
Telecom products.
*Notified body number (used only if 
applicable - refer to the product label)


