Maintenance and Service Guide: HP ap5000 All-In-One Point of Sale System

◦ 5
◦
10
◦
11
● Serial Port3 Standard Mode/12V – select the power mode for this serial port:
◦
12V
◦
Standard Mode
●
MSR Port Address – select the IO base address of the serial port:
◦
Disabled
◦ 3E8
◦
2E8
◦
2F0
◦ 2E0
◦
2D8
◦
2D0
● MSR Port IRQ – select the IRQ for this serial port:
◦ 3
◦
4
◦
5
◦ 10
◦
11
USB Configuration Allows you to configure the USB support:
●
All USB Ports – enable or disable
●
USB Port 3/4 – enable or disable
● USB Port 5 – enable or disable
●
Side USB Port – enable or disable
●
Legacy USB Support – enables support for legacy USB:
◦
Disabled
◦
Enabled
◦ Auto – disables legacy support if no USB devices are connected
●
USB 2.0 Controller Mode – configures the USB controller speed:
◦
Full Speed (12 Mbps)
◦ High Speed (480 Mbps)
Manual Brightness
Setting
Allows you to select the brightness level of the LCD panel form 0 through 7. 0 is the lowest
brightness and 7 is the highest brightness.
Table 3-2 Computer Setup—Advanced (continued)
Computer Setup (F10) Utilities 11