Upgrading and Servicing Guide

Before You Begin

Observe the following requirements before removing and

replacing the hard disk drive.

Tools Needed

 Flathead/Torx screwdriver #15

Small screws are easily lost. Remove screws over a surface that

allows you to retrieve them if they fall.

IMPORTANT: A hard disk drive is extremely sensitive to shock

impact. Do not bang or drop it. Do not touch the circuit board.

Static electricity can damage the drive.

WARNING:

 Never open the cover with the power

applied. You might damage your

computer or be injured by the spinning

fan blades.

 Avoid touching sharp edges inside the

computer.

 Keep your hands away from the moving

fan.

 Keep fingers and tools clear of the fan

when the power is applied.

CAUTION: Static electricity can damage the

electronic components inside the computer. Discharge

static electricity by touching the metal cage of the

computer before touching any internal parts or

electronic components.

HP TouchSmart

610

Removing and replacing a Hard Disk Drive

Computer features may vary by model.