RAID User Guide

To configure SATA mode in Computer Setup (BIOS):
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup (BIOS).
3. Use a pointing device or the arrow keys to select System Configuration > Device
Configurations.
4. In SATA Device Mode, change the value to RAID.
5. Use the arrow keys to select File > Save Changes and Exit, and then press enter.
For more information on Intel Smart Response Technology, see
http://www.intel.com/support/
chipsets/sb/CS-032826.htm?wapkw=Smart%20Response%20Technology.
12 Chapter 4 Intel Rapid Storage Technology