HP SmartStream 3D Command Center 3.2 installation and troubleshooting guide

Technical Newsletter | HP SmartStream 3D Command Center 3.2 installation and troubleshooting guide
8
Proxy configuration
In case it is necessary to configure a proxy server connection:
1) Open HP SmartStream 3D Command Center Client and click the gear icon on the top-right corner. Then click Network
connectivity.
2) You should stay connected to the server in order to save your configuration.
3) Click the Advanced tab.
4) Enable the Use a Proxy Server option.
5) Fill in the hostname and port of your proxy. If needed, also add the username and password.
6) Click Save to finish the configuration and send it to the HP SmartStream 3D Command Center Server.
In addition, the range of your local IP addresses should be added to your local PC’s proxy configuration, in order to avoid
having to resolve them through the proxy.