Specifications

Optical drive
Description Spare part number
DVD±RW Double-Layer with SuperMulti Drive 718434-001
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 30).
5. Remove the memory module service cover (see
Memory module on page 36).
Remove the optical drive:
1. Remove the Phillips PM2.5×4.5 screw (1) that secures the optical drive to the computer.
2. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the left to release the optical drive from the computer.
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts