Specifications

Reverse this procedure to install the heat sink.

Processor

NOTE: The processor spare part kit includes replacement thermal material.

Description Spare part number

Intel Quad Core i7-3632QM 2.20-GHz processor (SC turbo up to 3.20-GHz; 1600-MHz FSB;

6.0-MB L3 cache, 35 W)

701658-001

Intel Dual Core i5-3230M 2.60-GHz processor (SC turbo up to 3.20-GHz; 1600-MHz FSB, 3.0-

MB L3 cache, 35 W)

711903-001

Intel Dual Core i5-3210M 2.50-GHz processor (SC turbo up to 3.10-GHz; 1600-MHz FSB, 3.0-

MB L3 cache, 35 W)

680645-001

Intel Dual Core i3-3120M 2.40-GHz processor (1600-MHz FSB, 3.0-MB L3 cache, 35 W) 700627-001

Intel Dual Core i3-3110M 2.40-GHz processor (1600-MHz FSB, 3.0-MB L3 cache, 35 W) 682417-001

Intel Pentium 2020M 2.40-GHz processor (1600-MHz FSB, 2.0-MB L3 cache, 35 W) 700628-001

Before removing the processor, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 30) and then remove the following components:

a. Hard drive (see

Hard drive on page 31)

b. WLAN module (see

WLAN module on page 33)

c. Solid-state drive (see

Solid-state drive on page 35)

d. Memory module service cover (see

Memory module on page 36)

Component replacement procedures