Specifications

e.
Optical drive (see
Optical drive on page 38)
f. Keyboard (see
Keyboard on page 42)
g.
Top cover (see
Top cover on page 45)
h. Fan (see
Fan on page 52)
i. System board (see
System board on page 55)
j. Heat sink (see
Heat sink on page 59)
Remove the processor:
1. Turn the system board upside down, with the front toward you.
2. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
3. Lift the processor (3) straight up, and remove it.
NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts