Specifications

2.
Remove the speakers (2).
Reverse this procedure to install the speakers.
Display assembly subcomponents
NOTE: The display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
To remove the display assembly and access the display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 30) and then remove the following components:
a. Hard drive (see
Hard drive on page 31)
b.
WLAN module (see
WLAN module on page 33)
c. Solid-state drive (see
Solid-state drive on page 35)
d. Memory module service cover (see
Memory module on page 36)
e. Optical drive (see
Optical drive on page 38)
f. Keyboard (see
Keyboard on page 42)
g. Top cover (see
Top cover on page 45)
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts