User Manual

Clear paper jams in the duplexer (duplex models only)
Use the following procedure to check for paper in the duplexer. When a jam occurs, the control panel displays
an animation that assists in clearing the jam.
1. At the rear of the printer, open the duplexer.
2. Remove any jammed or damaged sheets of paper.
CAUTION: The fuser is located above the rear door, and it is
hot. Do not attempt to reach into the area above the rear door
until the fuser is cool.
3. Close the duplexer.
136 Chapter 9 Solve problems ENWW