User Guide

4 Chapter 3. Setting Up the Monitor ENWW

3. Setting Up the Monitor

Unpacking the Monitor

1. Unpack the monitor. Make sure all contents are included. Store the packing box.

2. Turn off the computer and other attached devices.

3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected

rea for placing the monitor screen-down while preparing it for installation.

Installing the Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a

convenient, well-ventilated location near your computer. Connect the monitor cables

after you have installed the monitor.

Preparing the monitor for desktop use

1. Set the monitor screen face down on a flat, soft, protected table or desk surface

with th

e support column overhanging the edge.

CAUTION: The screen is fragile. Avoid touching or applying pressure to the LCD

screen; doing so can cause damage.

2. Press the base into the colum

n until it locks in position, and then secure the base

by tightening the screw on the bottom of the base.

Figure 3-1 Attaching the Base