HP EliteBook Folio 1020 G1 Notebook PC HP EliteBook Folio 1020 G1 Special Edition Notebook PC Maintenance and Service Guide

ForcePad (Touchpad)
Description Spare part number
ForcePad for use in models with FHD displays (includes cable) 790066-001
ForcePad for use in Special Edition models with QHD displays (includes cable) 814812-001
ForcePad for use in Bang & Olufsen Limited Edition models (includes cable) 837349-001
Before removing the ForcePad, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 33).
5. Remove the battery (see Battery on page 60).
Remove the ForcePad:
1. Disconnect the ForcePad cable (1) from the system board.
2. Disconnect the NFC module antenna cable (2) from the ForcePad.
3. Remove the four Phillips PM2.0×2.0 broadhead screws (3) that secure the ForcePad to the computer,
and then lift the ForcePad from the computer (4).
Reverse the removal procedures to install the ForcePad.
Component replacement procedures 63