HP EliteBook Folio 1020 G1 Notebook PC HP EliteBook Folio 1020 G1 Special Edition Notebook PC Maintenance and Service Guide

2. Remove the WLAN antenna from the routing channel on the system board (1).
3. Remove the eight Phillips PM2.0×3.0 screws (2) that secure the system board to the computer.
4. Lift the right side of the system board up at an angle (1).
CAUTION: To avoid damaging or breaking the system board, use two hands when removing the board.
Do not lift up on the narrow end of the board.
5. Pull the at ribbon cable through the slit in the system board (2).
Component replacement procedures 65