HP EliteBook Folio 1020 G1 Notebook PC HP EliteBook Folio 1020 G1 Special Edition Notebook PC Maintenance and Service Guide

6. Pull the system board away from and out of the computer (3), making sure the connectors on the side of
the board are clear of the computer.
Reverse this procedure to install the system board.
Power button
Description Spare part number
Power button not spared
Before removing the power button, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 33).
5. Remove the battery (see Battery on page 60).
6. Remove the system board (see System board on page 64).
Remove the power button:
1. Remove the two Phillips PM2.0×2.4 screws (1) that secure the button to the computer.
66 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts