HP ZBook 15 G2 Mobile Workstation Maintenance and Service Guide

Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket or screws. These components
are included in the Hard Drive Hardware Kit, spare part number 734280-001.
Description Spare part number
Hard drive, 2.5-inch
1-TB, 7200-rpm, 9.5-mm 766644-001
1-TB, 5400-rpm, 2.5-in 778192-001
750-GB, 7200-rpm, 2.5-in 778191-001
500-GB, 7200-rpm, 7.0-mm 703267-001
500-GB, 5400-rpm, 7.0-mm, FIPS 730946-001
500-GB, 7200-rpm, 7.0-mm, self-encrypting 703268-001
Solid-state drive (SSD)
512-GB, SATA-3 795962-001
512-GB, SATA-3, self-encrypting drive (SED), OPAL 2 813139-001
256-GB, SATA-3 795959-001
256-GB, SATA-3, self-encrypting drive (SED), OPAL 1 795960-001
256-GB, SATA-3, self-encrypting drive (SED), OPAL 2 795961-001
240-GB, SATA-3 795958-001
180-GB, SATA-3 795957-001
128-GB, SATA-3 795956-001
Before removing the hard drive, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 37).
5. Remove the service cover (see Service cover on page 38).
Remove the hard drive:
1. Loosen the 3 hard drive captive screws (1).
2. Pull the hard drive tab (2) to the left to disconnect the hard drive.
Component replacement procedures 39