HP ZBook 15 G2 Mobile Workstation Maintenance and Service Guide
20. If it is necessary to replace the display panel:
a. Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure.
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
b. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in
front of the display enclosure.
c. Release the adhesive strip (2) that secures the display panel cable connector to the display panel.
d. Disconnect the display panel cable (3) from the display panel.
e. Remove the display panel.
The display panel is available using spare part numbers 735607-001 (15.6-in, FHD, UWVA, LED
display panel), 735604-001 (15.6-in, FHD, SVA, LED display panel) and 797849-001 (15.6-in, QHD
+, UWVA, LED display panel).
21. If it is necessary to replace the webcamera/microphone module or microphone module:
CAUTION: Handle the webcamera/microphone module and microphone module with caution. These
modules have a thin prole and are susceptible to damage when not handled carefully.
Component replacement procedures 85