HP EliteBook 850 G2 Notebook PC HP EliteBook 750 G2 Notebook PC HP ZBook 15u G2 Mobile Workstation - Maintenance and Service Guide

Display assembly
NOTE: Non-TouchScreen display assemblies are spared at the subcomponent level only. See Display panel
on page 66 earlier in this chapter for information on removing the display bezel, display panel, and webcam/
microphone module.
Description Spare part number
15.6-in, FHD, SVA (1920×1080), capacitive TouchScreen display assembly (includes webcam
and microphone)
784781-001
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see Service cover on page 47), and then remove the following components:
a. Battery (see Battery on page 49)
b. Keyboard (see Keyboard on page 59)
c. Base enclosure (see Base enclosure on page 71)
Remove the display assembly:
1. Release the display panel cable from the routing channel built into the system board, and then
disconnect the display panel cable (1) from the system board.
ENWW Component replacement procedures 95