HP EliteBook 850 G2 Notebook PC HP EliteBook 750 G2 Notebook PC HP ZBook 15u G2 Mobile Workstation - Maintenance and Service Guide

Solid-state drive
Description Spare part number
512-GB, SATA-3 solid-state drive 803386-001
256-GB, SATA-3, TLC solid-state drive 803389-001
256-GB, SATA-3, SED, Opal 2 solid-state drive 803387-001
256-GB, SATA-3 solid-state drive 803390-001
256-GB, M2, PCIe-2×2 solid-state drive 803381-001
240-GB, SATA-3 solid-state drive 803385-001
180-GB, SATA-3, SED, Opal 2 solid-state drive 803384-001
180-GB, SATA-3 solid-state drive 803383-001
128-GB, SATA-3, TLC solid-state drive 803388-001
128-GB, SATA-3, solid-state drive 803382-001
120-GB, M2, SATA-3 solid-state drive 803380-001
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see Service cover on page 47).
5. Remove the battery (see Battery on page 49).
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the solid-state drive to the system board. (The
solid-state drive tilts up.)
52 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts ENWW