Hardware manual

Configuring Speaker and Sound Options 39
Step 8 is optional for a two-speaker setup.
8 After the speakers are connected to the PC,
configure the audio software for sound output
for your PC model:
■ 3 Connector: See “Configuring Audio
Output with Multi-channel Sound
Manager” on page 48.
■ 6 Connector: See “Configuring Audio
Output with Sound Effect Manager” on
page 51.
■ Sound Card: See “Configuring Audio
Output with a Sound Card” on page 53.
The following diagram shows a typical 2.1 audio installation:
Connecting 4.1 Audio Speakers
To connect two front speakers, two rear speakers,
and a subwoofer for four-channel (4.1 speaker)
output:
1 Turn off the PC.
.
2 Connect the front speaker cable to the lime
green audio line out connector that matches
the back of your PC.
3 Connect the rear speaker cable to the black
connector that matches the back of your PC.
■ For 3 Connector systems, the blue audio
line in connector functions as a rear line
out when a multichannel audio
configuration is activated.
OUT
n
3 is Three Connector
6 is Six Connector
S is Sound Card
OUT
3
6
S
IN
3
6
S