Hardware manual

54 HP Media Center PC Getting Started Guide
Configuring Audio for Media Center
Follow these steps after you have installed,
connected, and configured your speakers.
To configure multichannel audio output for the
Media Center:
1 Click Start on the taskbar, scroll down, and
select Media Center.
2 Click Settings, click DVD. Scroll down and
click Audio.
3 Select your speaker mode. For example, select
6 speaker mode (5.1 channel).
4 Click Apply, and then click OK.
5 Close the window.
Configuring Audio for the WinDVD Player
Follow these steps after you have installed,
connected, and configured your speakers.
The InterVideo WinDVD SE program (select models
only) is set up for two-speaker (stereo) output. To
hear all speakers from DVD movies recorded with
multichannel audio, change the audio properties for
WinDVD to match your speaker configuration (if
your InterVideo WinDVD program supports more
than two channels).
If you want to play a stereo DVD, you may change
the audio properties of WinDVD to match the
recorded DVD audio output.
1 Insert a DVD
Or
Start WinDVD: Click Start, Choose All
Programs, Video, InterVideo WinDVD
Player. Click InterVideo WinDVD 4 SE.
The WinDVD video window opens.
2 Right-click anywhere in the WinDVD video
window, and click Setup. The Setup window
opens.
3 Click the Audio tab.
4 Select Audio Output Configuration.
Choose Analog or Digital (SPDIF). Click
Apply.
5 Select Audio Speaker Configuration.
Click the option for the number of speakers to
match your multichannel speaker system.
6 You can click the Test button to test the
speakers. You should be able to hear the
speakers. Click Stop, and then click OK.