Basic manual

14 PC Basics Guide
Using Speakers
Speakers are included with the monitor (select models only), or are sold
separately. For details on connecting stereo speakers to the PC, see the quick
setup poster.
NOTE: Speakers may be passive (no power button and no power cord) or active
(power button or power cord). Your PC supports only active (powered) speaker
systems; the speaker system must have its own power cord.
A stereo speaker set is a left-right, two-channel speaker system. A multi-channel
audio speaker system is a system with more than two channels, and it may include
a subwoofer. For example, 5.1 channels, referred to as a six-speaker mode, uses
two front speakers (left-right), two rear speakers (left-right), a center speaker, and
a subwoofer.
If your PC has multi-channel audio speaker capacity (select models only), you can
connect four channels for four speakers output or six channels for 5.1 speakers
output.
Connect your speaker system to the PC and then configure the audio software for
sound output.
Adjusting Speaker Volume
Use the Volume icon on the taskbar to set speaker volume. Then you can
adjust the volume using:
• The Volume knob or buttons on the keyboard (select models only).
• The Volume knob on the speakers (select models only).
NOTE: If you do not see this Volume icon on the taskbar, click Start, choose
Control Panel, click Sounds, Speech, and Audio Devices, if it is present,
and then double-click Sounds and Audio Devices to open the Sounds and
Audio Devices Properties window. On the Volume tab, place a check in the Place
volume icon in the taskbar check box. Click Apply, and then click OK. The
Volume icon appears in the taskbar.