Part Replacement Instructions

BEFORE YOU BEGIN

CD/DVD DRIVE

1 2 3

1 3

4 5 6

Unplug the computer Ground yourself Remove side cover

Remove front bezel

Remove connectors

Remove part Replace part

Replace connectors

Replace front bezel

Before doing

any work inside

your computer,

ground yourself

by touching a

metal part of

the computer’s

frame.

Your replacement

kit may contain

more parts than

needed for the part

you are replacing.

All connectors are keyed for their intended location

and should not require excessive force to plug in.

Release and slide part forward

PAGE 1
BEFORE YOU BEGIN 1 2 Unplug the computer A 3 Ground yourself Remove side cover B Before doing any work inside your computer, ground yourself by touching a metal part of the computer’s frame. A B CD/DVD DRIVE 1 2 Remove front bezel Release and slide part forward 3 Remove connectors B B B A A A 4 Remove part 5 6 Replace part Replace connectors A Your replacement kit may contain more parts than needed for the part you are replacing.
PAGE 2
HARD DRIVE 1 2 Remove front bezel 3 Remove connectors Remove drive cage A B B B A A C C 4 5 Remove part 6 Replace part Replace drive cage A A B B B A A B 7 Replace connectors 8 Replace front bezel 2 Remove connectors A C All connectors are keyed for their intended location and should not require excessive force to plug in.
PAGE 3
4 Replace part 5 B Replace connectors A MEDIA READER 1 2 Remove front bezel 3 Release part Remove connectors B B B A A A 4 Remove part 5 Replace connectors 6 Replace part A B 7 Replace front bezel 3
PAGE 4
POWER SUPPLY 1 2 Lay down computer Remove power supply B A 3 Remove connectors A C B D 4 Replace new connectors A D B C All connectors are keyed for their intended location and should not require excessive force to plug in.