Getting Started Guide

Configuring Speaker and Sound Options 35
4 Connect the center/subwoofer speaker cable
to the gold (or pink Mic) connector that
matches the back of your PC.
■ For 3-connector systems, the pink Mic
connector functions as a center/subwoofer
speaker Line Out when a multichannel
audio configuration is activated.
5 Connect the cables to the audio system.
6 Connect the front, rear, and center speakers to
the subwoofer. Refer to the speaker
documentation.
7 Turn on the PC.
8 Plug in the speaker system power.
9 Turn on the speaker system.
10 After the speakers are connected to the PC,
configure the audio software for sound output
for your PC model:
■ 3 connectors: See “Configuring Audio
Output with Multi-channel Sound
Manager” on page 44.
■ 6 connectors: See “Configuring Audio
Output with Sound Effect Manager” on
page 47.
■ Sound card: See “Configuring Audio
Output with a Sound Card” on page 49.
The following diagram shows a typical 5.1 audio installation:
3
6
S
n
Always turn on the
PC before you turn on
the speaker system.
OUT
IN