Getting Started Guide

Configuring Speaker and Sound Options 31
Step 8 is optional for a two-speaker setup.
8 After the speakers are connected to the PC,
configure the audio software for sound output
for your PC model:
■ 3 connectors: See “Configuring Audio
Output with Multi-channel Sound
Manager” on page 42.
■ 6 connectors: See “Configuring Audio
Output with Sound Effect Manager” on
page 45.
■ Sound card: See “Configuring Audio
Output with a Sound Card” on page 47.
The following diagram shows a typical 2.1 audio installation:
Connecting 4.1 Audio Speakers
To connect two front speakers, two rear speakers,
and a subwoofer for four-channel (4.1 speaker)
output:
1 Turn off the PC.
.
2 Connect the front speaker cable to the lime-
green Audio Line Out connector that matches
the back of your PC.
3 Connect the rear speaker cable to the black
connector that matches the back of your PC.
■ For 3-connector systems, the blue audio
line in connector functions as a rear line
out when a multichannel audio
configuration is activated.
OUT
n
3 is three connectors
6 is six connectors
S is sound card
OUT
3
6
S
IN
3
6
S