HP Media Remote Control (Select Models Only) User Guide
© Copyright 2008 Hewlett-Packard Development Company, L.P. Windows and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Table of contents 1 Component functions 2 Button quick reference 3 Inserting the battery 4 Troubleshooting Index ...................................................................................................................................................................
iv
1 Component functions NOTE: Your computer may include an updated remote control that functions differently than described in this guide. For the latest user guide, go to the product support page for your computer at http://www.hp.com. The infrared lens on the remote control links the remote control to the computer. The link requires a lineof-sight path between the infrared lens on the remote control and the infrared lens on the computer.
2 Button quick reference This section provides information on the functions of the remote control buttons. NOTE: The position of the buttons may vary, depending on your remote control model. Button Function in Windows Function in QuickPlay (select models only) Power ● When the computer is off, press the button to start Windows. Press the button to shut down the computer. ● When the computer is on, press the button to emulate the computer power button.
Button Function in Windows Function in QuickPlay (select models only) Mute ● Press the button to mute speaker volume. ● Press the button to mute speaker volume. ● If the volume is muted, press the button to restore speaker volume. ● If the volume is muted, press the button to restore speaker volume. Volume up Press the button to increase speaker volume. Press the button to increase speaker volume. Volume down Press the button to decrease speaker volume.
Button Function in Windows Switch screens Press the button to switch the computer image between the computer display and an external display. Function in QuickPlay (select models only) NOTE: On select models, the switch screens button is green. Snapshot Press the button to capture a picture of the computer screen and save it to the clipboard. NOTE: yellow. Zoom Press the button to capture a picture of the computer screen and save it to the clipboard.
Button Function in Windows Function in QuickPlay (select models only) NOTE: These buttons do not function when Teletext is not supported. Information ● ● Windows Media Center Channel/page up Channel/page down Next Stop Press the button to display available information about a selected media file, such as a TV program summary or music artist information. ◦ You may need to be connected to the Internet to receive some media information. ◦ Some media may not include this information.
Button Function in Windows Function in QuickPlay (select models only) Fast Forward ● ● Press the button to move the selected video media forward. To increase the fast forwarding speed, press the button up to 3 times. NOTE: The button may not work with some video files. ● Enter 6 Press the button to move MP3 music files forward. ● Press the button to move a video forward. ● Press the button to move the television Program Guide forward 3 hours.
3 Inserting the battery WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Dispose of used batteries according to the instructions in the Regulatory, Safety and Environmental Notices located in Help and Support. To access the notices, select Start > Help and Support > User Guides. To insert the battery into the remote control, follow these instructions: 1.
3. 8 Align the battery compartment cover with the battery compartment (2), and then slide the cover to close it (3).
4 Troubleshooting Try the following solutions if your remote control does not function properly: ● Be sure that you have a clear line of sight from the remote control to the infrared port on the computer or optional docking device. ● Be sure that you are within range of the infrared port on the computer or optional docking device. ● Be sure that the battery is properly installed and has a charge. Replace the battery if necessary.
Index A arrow buttons 2 B back button 2 battery, inserting 7 buttons arrow 2 back 2 change/page up 5 channel/page down 5 clear 3 DVD menu 4 enter 6 forward 6 guide 2 Information 5 keypad 3 live TV 4 mute 3 next 5 OK 2 play 3 power 2 previous 3 print 3 quick reference 2 QuickPlay 4 recorded TV 2 rewind 3 snapshot 4 stop 5 switch screens 4 Teletext 4 volume down 3 volume up 3 Windows Media Center 5 zoom 4 10 Index C change/page up button 5 channel/page down button 5 clear button 3 D DVD menu button G gui
