Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
136
Mellanox Technologies Confidential
Step 3. Delete the old image (if one exists) that is listed under Images available to be installed
prior to fetching the new image. Use the command
image delete for this purpose.
Step 4. Fetch the new software image.
Step 5. Display the available images.
No image install currently in progress.
Boot manager password is set.
No image install currently in progress.
Require trusted signature in image being installed: yes (default)
switch (config) #
switch (config) # image delete image-PPC_M460EX-SX_3.0.1224.img
switch (config) #
When deleting an image, you delete the file but not the partition. This is recommended
so as to not overload system resources.
switch (config) # image fetch scp://username:password@192.168.10.125/var/www/html/
<image_name>
Password (if required): ******
100.0%[################################################## ###############]
switch (config) #
To recover from image corruption (e.g., due to power interruption), there are two
installed images on the system. See the commands:
image boot next
image boot location
.
switch (config) # show images
Installed images:
Partition 1:
SX <old ver> 2013-04-28 16:02:50
Partition 2:
SX <new ver> 2013-04-28 16:52:50
Images available to be installed:
new_image.img
SX <new ver> 2013-04-28 16:52:50
Serve image files via HTTP/HTTPS: no
No image install currently in progress.